Car Rear View Backup Camera 8 IR Night Vision US License Plate Frame CMOS

Product Code: A360
Availability: In Stock

Qty: - +
   - OR -   

170 degree viewing angle macro lens with 'mirror' image;
IP67 waterproof, high sensitive color CMOS (PC1030) image sensor;
8 IR red LEDs night vision and excellent performance of 0lux at F2.0;
Built-in distance scale lines with trapezoid electronic ruler function;
License mount, ideal for all vehicles that use a standard U.S. license plate.

Image Sensor: Color CMOS
Lens Angle: 170 Degree
Sensing area: NTSC 4.08 x 3.10mm
Effective Pixels: NTSC 510*496 pixels
Horizontal Resolutions: 420 TV lines
Minimum Illumination: 0lux with IR on
Video output: RCA connector, 1.0V p-p, 75ohm
Power Consumption: 60mA
Power Supply: DC12V
Operating Temperature: -20 - 60 (Celsius Degree) RH95%MAX
Dimensions: 12.21" x 6.34" x 1.06" / 310 x 161 x 27 mm

This camera has a mirror image.
This camera only supports NTSC video system, so please make sure your monitor supports NTSC video system before you buy it.
You can install the camera on your license plate. During installation, please connect the power cable of the backup camera to the harness wires that connect to the backup light on the tail light assembly (Please note that the red wire end is positive, while the black one is negative). And connect the RCA output end to the car monitor.
The camera switch is controlled by the reverse gear shift.
Please take care of the sealing to prevent water leakage when installation.

Package includes: 
1 x Car Rear View Camera 
1 x 3.5ft Power Cable
1 x 20 feet RCA Video Cable
1 x User Manual

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: